Specifications: Number of channels 2
Output power 2-channel mode mono-bridged mode
EIAJ Test Standard, 1 kHz, 1% THD
4 Ω / Ch 8 Ω / Ch 70 V - 8 Ω Ch pair: 1,200 W 600 W 1,200 W - 2,400 W
Max output voltage / current 116 Vpeak / 65 Apeak
AC Mains Power:
Power supply Universal, regulated switch mode
Operating voltage / Inrush current 115 V / 230 V (factory selection) ± 15%, 50 Hz - 60 Hz / < 28 ARMS
Consumption / current draw @ 230 V @ 115 V
Idle 35 W 0.3 A 35 W 0.6 A
I/8 of max output power @ 4 Ω 371 W 2.54 A 371 W 5 A
I/4 of max output power @ 4 Ω 701 W 4.5 A 701 W 9 A
Thermal:
Environmental operating temperature 0° - 45° C / 32° - 113° F
Thermal dissipation Fan, continuously variable speed, temperature controlled, front to rear airflow
Idle 126 BTU/h 32 kcal/h
I/8 of max output power @ 4 Ω 529 BTU/h 133 kcal/h
I/4 of max output power @ 4 Ω 935 BTU/h 236 kcal/h
Audio:
Gain 32 dB, 30 dB, 28 dB, 26 dB, 24 dB, 22 dB, 20 dB, 18 dB, 14 dB, 4 dB, -∞, user selectable
Frequency response 10 Hz - 30 kHz (1 W @ 8 Ω, ±3 dB)
S/N ratio (amplifier section) >113 dBA (20 Hz - 20 kHz, A weighted)
Crosstalk separation >70 dB @ 1 kHz
Input sensitivity @ 8 Ω 1.73 V / 6.98 dBu
Max input level 6 V / 17.7 dBu
Input impedance 10 k Ω
THD+N / SMPTE IMD 0.05% @ 1/2 of full power
DIM100 IMD typ. <0.005% (<0.02% @ >0.1 W)
Slew rate 40 V/μs @ 8 Ω, input filter bypassed
Damping factor @ 8 Ω >5000 @ 100 Hz
Front Panel:
Indicators 4 LEDs per channel: 3 x green, 1 x red
2 status LEDs: 1 x green, 1 x yellow
Controls 1 stepped level attenuator pot per channel; mains switch
Maintenance Dust filter foam behind front panel
Rear Panel:
Audio signal input connectors 2 x balanced Neutrik® XLR female
Loudspeaker output connectors 2 x Neutrik® Speakon NL4MD,
2 x Neutrik® XLR male hard-wired to the corresponding input
Network data port Ethernet 1 x RJ45 with activity LED with 2 rotary address switches
DSP preset selection 1 x Pushbutton (stepping through bank of 4 presets)
1 x 4 LED preset indicators
Aux voltage 1 x 2-pin Phoenix type MC 1.5/2-ST-3.81
AC mains IEC C13 16 A connector; AC mains cord with 3-pin plug 15 A for US, IEC Schuko 16 A for every other nation
Controls 1 x link switch, linking analog inputs 1 & 2
Construction:
Dimensions W 483 mm / 19”, H 44.5 mm / 1 RU, D 358 mm / 14.1”
Chassis 1 mm (0.04”) steel chassis and steel